Home PRODUCTS Locks Cylindrical Locks GT Series

gt_reflect

GT series SPIRIT from PDQ Industries, Inc. Leola, Pennsylvania, assembled in the USA, meeting the requirements of the Buy American Act with a twenty-five year manufacturer's limited warranty, and be certified to ANSI A156.2, Series 4000, Grade 1.

Windstorm Resistant Product Listed - ANSI A250.13-2003, ASTM E1886-02, ASTM E330-02. Outswing: 350 ft-lbs., Inswing: N/R, Design Load Rating: 1485lbf. Locksets shall be listed by UL / ULC for ratings of “A”  label (3 hours) and less, UL10C / UBC 7-2 (1997) positive pressure, for single doors up to 4’0” x 8’0”.

Solid cast levers with no plastic inserts, minimum 5-1/2" overall length with supportive spring power totally independent of chassis or latch unit. 9/16” throw latch requires only 41° rotation of levers for full retraction. Concealed fasteners with through-the-door through-bolt attachment outside the 2-1/8” door prep

Exceeds 2400 in lbs. of torque resistance. The GT has been tested to more than 2 Million cycles (more than 2-1/2 times the  BHMA Grade 1 requirement) with virtually no lever sag.

  Image

GT Lock Specifications

FOR DOORS:

1-3/4" to 2-1/4" thick. Factory adjusted for 1-3/4".

DOOR PREP:

Fits standard 161 door prep. Through-door thru-bolting.

BACKSET:

2-3/4" only. Guarded.

CASE:

Heavy duty zinc die-cast, investment cast and chromated cold rolled steel mechanism. Billet steel spindles.

FRONT:

Stainless steel, wrought brass, or wrought bronze. 2-1/4" x 1-1/8". Beveled 1/8" on 2".

ROSE:

3-3/8" diameter.

STRIKE:

4-7/8" x 1-1/4"(ASA). "T" or "FL" Strike optional. Stainless Steel, wrought brass or wrought bronze.

LATCHBOLT:

9/16" Throw. Adjustable front for flat or beveled doors.

HAND:

Non-handed

TRIM:

PHL, BSN or MIA levers are solid zinc diecast. 41° lever rotation. Wrought brass roses. Concealed screws.

KEYS:

Two (2) change keys per lock.

KEYWAYS:

Available for all keyways of most major manufacturers

INTERCHANGEABLE CORE:

Available for all keyed functions / 6 or 7-pin / Compatible with Best, Falcon and Arrow / Large Format IC Core available. Check with factory

CYLINDER:

Brass 6-pin insert cylinder keyed to 5-pins

KEYING:

Can be MK, CMK, GMK. Available Zero bitted (KO), Keyed Different (KD), Keyed Alike (KA). Can be keyed into existing master key systems of other manufacturers.

FINISHES:

605 (US3), 606 (US4), 612 (US10), 613 (US10B), 625 (US26), 626 (US26D)

U.L. LISTED:

U.L., U.L.C. listed for “A” label (3 hour) single swing doors (4' x 8') / UL 10C / UBC 7-2 (1997) positive pressure, for single doors up to 4’0” x 8’0”

CERTIFICATIONS:

ANSI A156.2, Series 4000, Grade 1. Meets all applicable accessibility requirements of the ADA. U. L. Listed. BHMA.

WARRANTY:

Twenty Five Year manufacturer's limited warranty for all functions

COUNTRY OF ORIGIN:

Assembled in the USA using US and Foreign material.  This product meets the requirements of the Buy American Act.

Strikes

4-7/8" (ASA) strike included with every GT unless otherwise specified.