Home PRODUCTS Locks Cylindrical Locks XGT Series



XGT (Super GT) series SPIRIT from PDQ Industries, Inc. Leola, Pennsylvania, assembled in the USA, meeting the requirements of the Buy American Act with a Lifetime manufacturer's limited warranty, certified to ANSI/BHMA A156.2-1996, Series 4000, Grade 1.

Windstorm Resistant Product Listed - ANSI A250.13-2003, ASTM E1886-02, ASTM E330-02. Outswing: 350 ft-lbs., Inswing: N/R, Design Load Rating: 1485lbf. Locksets shall be listed by UL / ULC for ratings of “A”  label (3 hours) and less, UL10C / UBC 7-2 (1997) positive pressure, for single doors up to 4’0” x 8’0”.

Levers to be solid cast, with no plastic inserts, minimum 5-1/2" overall length with supportive spring power totally independent of chassis or latch unit. Latchbolt to be minimum 9/16” throw and requires only 41° rotation of levers for full retraction. Lockset fasteners to be concealed with through-the-door through-bolt attachment outside the 2-1/8” door prep.

Independent testing confirms 3000 in lbs. of torque resistance.  Additionally, the XGT has been tested to more than 4 Million cycles (more than 5 times the  BHMA Grade 1 requirement) with virtually no lever sag.


XGT Lock Specifications

FOR DOORS: 1-3/4" to 2-1/4" thick. Factory adjusted for 1-3/4".
DOOR PREP: Fits standard 161 door prep. Through-door thru-bolting.
BACKSET: 2-3/4" only. Guarded.
CASE: Heavy duty zinc diecast, investment cast and chromated cold rolled steel mechanism. Billet steel spindles.
FRONT: Stainless steel, wrought brass, or wrought bronze. 2-1/4" x 1-1/8". Beveled 1/8" on 2".
ROSE: 3-3/8" diameter.
STRIKE: 4-7/8" x 1-1/4"(ASA). "T" or "FL" Strike optional. Stainless Steel, wrought brass or wrought bronze.
LATCHBOLT: 9/16" Throw. Adjustable front for flat or beveled doors.
HAND: Non-handed
TRIM: PHL, BSN or MIA levers are solid zinc diecast. 41° lever rotation. Wrought brass roses. Concealed screws.
KEYS: Two (2) change keys per lock.
KEYWAYS: Available for all keyways of most major manufacturers
INTERCHANGEABLE CORE: Available for all keyed functions/  6 or 7pin / Compatible with Best, Falcon, and Arrow/ Large   Format IC Core Available.  Check with Factory.
CYLINDER: Brass 6-pin insert cylinder keyed to 5-pins
KEYING: Can be MK, CMK, GMK. Available Zero bitted (KO), Keyed Different (KD), Keyed Alike (KA). Can be keyed into existing master key systems of other manufacturers.
FINISHES: 605 (US3), 606 (US4), 612 (US10), 613 (US10B), 625 (US26), 626 (US26D)
U.L. LISTED: U.L., U.L.C. listed for “A” label (3 hour) single swing doors (4' x 8') / UL 10C / UBC 7-2 (1997) positive pressure, for single doors up to 4’0” x 8’0”
CERTIFICATIONS: ANSI A156.2, Series 4000, Grade 1. Meets all applicable accessibility requirements of the ADA. U. L. Listed. BHMA.
WARRANTY: Lifetime manufacturer's limited warranty for all functions
Assembled in the USA using US and Foreign material.  This product meets the requirements of the Buy American Act.


4-7/8" (ASA) strike included with every XGT unless otherwise specified.


Он ведет оптовую торговлю хмелем.

Последнее слово он произнес замирающим от восторга голосом.

Промежуточные звенья были без труда восстановлены отчасти на основании находок Спенглера, отчасти просто по догадкам.

На корму он бросился и вскочил на бочку, совершенно не отдавая себе отчета в том, что делает.

Осмотрев свою необычную спальню, давшую столь странное направление моим мыслям, я "Порча сглаз зло наведенное Диагностика и защита" стал подумывать о том, чтобы лечь.

Как раз на том месте, где теперь зеркало.