product

Electrified Exit Devices

Quiet Motorized Latch Retraction

Upgrade to quiet and dependable. Ideal solution for credentialed access. Interfaces with low energy power operators for ADA openings. Will maintain continuous latch retraction for electric dogging. Recommended power supply: PDQ #81440.
Available on all 6200 series wide and narrow stile RIM, Surface and Concealed Vertical Rod and Mortise exit devices.
The 6200 Series is ideal for stocking distributors as the exit device is universal. The function is easily determined by selecting from the extensive line of available trim options. Units are non-handed to facilitate easy field installation. The 6200 is available in a variety of architectural finishes that will compliment any decor.

Hot Links
Brochure Templates
ARCHITECTURAL SUBMITTAL SHEETS Instructions

Specs

Features:
  • Ultra Quiet Operation
  • For use with PDQ 6200 Wide Stile or 6202 Narrow Stile exit devices, panic and fire listed.
  • Unique motor drive retracts Push Pad.
  • Dual operation -maintained or momentary operation.
  • Supports remote signaled electric dogging.
  • Low power requirements. Interfaces with PDQ’s 81440 2A 24VDC Filtered/Regulated Power Supply, and EL Series Electrified Power Transfer Hinges
  • Suitable for pairing with Low Energy Power Operators
  • Non polarized leads
  • On-board diagnostic LED lights
  • UL Listed
Recommended Power Supply:
  • PDQ Model # 81440.
    – Input: 120VAC, .9A, 50/60Hz 240VAC, .6.A, 50/60Hz
    – Output: 24VDC, 2A, filtered and regulated.
  • Rated for simultaneous operation of 2ea devices.
  • Power Supply Requirements:
    – AC/DC Output Voltage – 1A min (filtered and regulated).
  • 12-24VDC @ < 1A initial surge (1 sec), 5mA standby after 30 sec.
    – AC Output Voltage.
  • 12-24VAC (60Hz) @ < 1A initial surge (1 sec), 15mA standby after 30 sec
Electrical Specifications:
  • Note: Operating voltage at ± 10% of rated voltage. Input voltage: 24VDC
  • Rated in-rush current: 1.0A.
  • Operational in-rush current: .85A.
  • Continuous current, electric dogging: .4A.
  • Recommended Power Supply: PDQ Model # 81440.
    Input: 120VAC, .9A, 50/60Hz 240VAC, .6.A, 50/60Hz
    Output: 24VDC, 2A, filtered and regulated.
Performance:
  • Motor drive factory tested to over 500,000 cycles (Over 2 times the ANSI/BHMA 156.25 Grade 1 STD).

Architectural Finishes

  • 605 (US3) - Bright Brass, Clear Coated

  • 606 (US4) - Satin Brass, Clear Coated

  • 613 (US10B) - Oil Rubbed Bronze, Oxidized Satin Bronze, Oil Rubbed, No Coating

  • 625 (US26) - Bright Chromium Plated, No Coating

  • 626 (US26D) - Satin Chrome Plated, No Coating

  • 630 (US32D) - Satin Stainless Steel, No Coating

/product-data/leed.pdf

/wp-content/uploads/2020/09/Warranty.pdf