ub
product

Grade 1 Exit Devices

6202 Series Surface Vertical Rod – Narrow Stile

The PDQ 6202 Series offers superior durability and security in commercial applications while providing compliance with life safety and fire code requirements. The 6200 Series is ideal for stocking distributors as the exit device is universal. The function is easily determined by selecting from the extensive line of available trim options. Units are non-handed to facilitate easy field installation. The 6200 is available in a variety of architectural finishes that will compliment any decor.

Surface Vertical Rod Ansi Type 2
Surface Vertical Rod LBR Ansi Type 2

Specs – Surface Vertical Rod Ansi Type 5 and Surface Vertical Rod LBR Ansi Type 5

6200-rim-icons
Chassis:
  • Corrosion resistant plated steel
Rail:
  • Extruded aluminum
Touch Pad:
  • Stainless steel
Latches:
  • Top Latch — Pullman with dead latching 5/8” (16mm) throw
  • Bottom Latch — Pullman with 5/8” (16mm) throw, held retracted during door swing
  • Fire Rated LBR device includes 1ea Auxiliary Fire Latch/Pin
Projection:
  • 3-1/8” projection
  • 2- 5/8” projection when dogged
Hand:
  • Device and trim are non-handed
Dogging:
  • Hex key dogging standard
  • Cylinder dogging optional
  • No dogging on fire listed devices
Minimum Style Width:
  • 2-5/8”
  • For 2” Narrow Stile applications, contact PDQ Technical Service
Door Thickness:
  • 1-3/4” For other door thickness applications, contact PDQ Customer Service
Door Width:
  • Supplied standard for 3 ft doors, “A” size units available, for maximum door width of 48”
  • Consult Door Width Chart to determine correct device for your application
Finishes:
  • 613 – Oil Rubbed Bronze, 630 – Satin Stainless Steel
Fasteners:
  • Device supplied with sex nuts, machine screws and wood screws
  • For Security Screws, contact Customer Service.
Mounting Height:
  • Device centerline from finished floor: 40” (1016mm)’
Vertical Rods:
  • 1/2” (13mm) diameter tubular stock for doors up to 7’ Door is Standard. (1’ & 2’ Extension Rods available)
Certifications, Listings, Compliances:
  • UL/ULC 305 listed for “Panic”, UL10C Listed for “Fire Exit Hardware” labeled for up to 3 hours for 4’0” x 8’0” maximum single, 8’0” x 8’0” maximum pairs
  • Certified to ANSI/BHMA 156.3-2001, Grade 1 (Pending)
  • Meets requirements of the Buy American Act.
Warranty:
  • Ten (10) year limited warranty
Electronic Access Control Options:
  • Motorized Latch Retraction and Dogging
  • Latch Bolt Monitoring
  • Request to Exit/Signal Switches
  • Alarms

Functions – Ansi Trim

6200 Series

Architectural Finishes

  • 605 (US3) - Bright Brass, Clear Coated

  • 606 (US4) - Satin Brass, Clear Coated

  • 613 (US10B) - Oil Rubbed Bronze, Oxidized Satin Bronze, Oil Rubbed, No Coating

  • 625 (US26) - Bright Chromium Plated, No Coating

  • 626 (US26D) - Satin Chrome Plated, No Coating

  • 630 (US32D) - Satin Stainless Steel, No Coating


Trim

  • Wide Escutcheon

  • Sectional

  • Grip Pull

  • Pull

  • Plate


Devices

  • RIM ANSI Type 1

  • Surface Vertical Rod Ansi Type 2

  • Surface Vertical Rod LBR Ansi Type 2

  • Concealed Vertical Rod Ansi Type 7 & 8

  • Concealed Vertical Rod LBR Ansi Type 7 & 8

  • Mortise ANSI Type 3

  • Rim Ansi Type 4

  • Surface Vertical Rod Ansi Type 5

  • Surface Vertical Rod LBR Ansi Type 5

  • Concealed Vertical Rod Ansi Type 6 & 7

  • Concealed Vertical Rod LBR Ansi Type 6 & 7


Electronic Access Control – Motorized Latch Retraction

mlr-images

Features:
  • Ultra Quiet Operation
  • For use with PDQ 6200 Wide Stile or 6202 Narrow Stile exit devices, panic and fire listed.
  • Unique motor drive retracts Push Pad.
  • Dual operation -maintained or momentary operation.
  • Supports remote signaled electric dogging.
  • Low power requirements. Interfaces with PDQ’s 81440 2A 24VDC Filtered/Regulated Power Supply, and EL Series Electrified Power Transfer Hinges
  • Suitable for pairing with Low Energy Power Operators
  • Non polarized leads
  • On-board diagnostic LED lights
  • UL Listed
Recommended Power Supply:
  • PDQ Model # 81440.
    – Input: 120VAC, .9A, 50/60Hz 240VAC, .6.A, 50/60Hz
    – Output: 24VDC, 2A, filtered and regulated.
  • Rated for simultaneous operation of 2ea devices.
  • Power Supply Requirements:
    – AC/DC Output Voltage – 1A min (filtered and regulated).
  • 12-24VDC @ < 1A initial surge (1 sec), 5mA standby after 30 sec.
    – AC Output Voltage.
  • 12-24VAC (60Hz) @ < 1A initial surge (1 sec), 15mA standby after 30 sec
Electrical Specifications:
  • Note: Operating voltage at ± 10% of rated voltage. Input voltage: 24VDC
  • Rated in-rush current: 1.0A.
  • Operational in-rush current: .85A.
  • Continuous current, electric dogging: .4A.
  • Recommended Power Supply: PDQ Model # 81440.
    Input: 120VAC, .9A, 50/60Hz 240VAC, .6.A, 50/60Hz
    Output: 24VDC, 2A, filtered and regulated.
Performance:
  • Motor drive factory tested to over 500,000 cycles (Over 2 times the ANSI/BHMA 156.25 Grade 1 STD).

Electronic Access Control – Escutcheon Wide 199A Series Electrified Locking/Unlocking Trim

Features:
  • Designed For Use With PDQ’s 6200 Series Wide Stile Rim, Surface Vertical Rod Exit Devices only. Not available with Concealed Vertical Rod and Mortise Exit Devices.
  • PVD (Physical Vapor Deposition) finish offered standard in 605 - Bright Brass, 606 - Satin Brass and 613 - Oil Rubbed Bronze. PVD coated finishes offer outstanding resistance to wear, durability and corrosion.
  • Motorized locking/unlocking.
    – FAIL SECURE – Outside trim is UNLOCKED when power is ON, and LOCKED when power is OFF. Lockset will lock in the event of a power failure.
    – FAIL SAFE – Outside trim is LOCKED when power is ON, and UNLOCKED when power is OFF. Lockset will unlock in the event of a power failure.
  • Field changeable from FAIL Secure (factory default) to FAIL SAFE.
  • Designed for AC or DC input voltage. No need to select voltage when specifying, detailing or ordering.
  • SMARTSENSE control board automatically accepts AC or DC input voltage.
Performance:
  • Motor drive factory tested to over1.4 million cycles (1.4 times the ANSI/BHMA grade 1 std).
Electrical Specifications:
  • Note: Operating voltage at ± 10% of rated voltage.
  • Input voltage: 12-24VDC or 12-24VAC.
  • Max In-rush current: < 1.0A.
  • Standby current:
    – 12VAC: 12mA.
    – 24VAC: 10mA.
    – 12VDC: 3mA.
    – 24VDC: 4mA.
Recommended Power Supply:
  • PDQ Model # 81440.
    – Input: 120VAC, .9A, 50/60Hz 240VAC, .6.A, 50/60Hz
    – Output: 24VDC, 2A, filtered and regulated.
  • Rated for simultaneous operation of 2ea trim assys.
  • Power Supply Requirements:
    – AC/DC Output Voltage – 1A min (filtered and regulated).
  • 12-24VDC @ < 1A initial surge (1 sec), 5mA standby
    after 30 sec.
    – AC Output Voltage.
  • 12-24VAC (60Hz) @ < 1A initial surge (1 sec), 15mA standby after 30 sec
Certifications, Compliances, Listings:
  • ANSI/UL10C and CAN/ULC-5104 Listed for “Fire Exit Hardware” up to 3 hours for 4’0” x 8’0” maximum single, 8’0” x 8’0” maximum pairs.
  • Certified to ANSI/BHMA A156.3-2008.
  • Lever designs comply with ADA (Americans with Disabilities Act) and ICC/ANSI 117.1 for accessible
    and Usable Buildings.
  • Assembled in the U.S.A. with U.S. and foreign material. Meets requirements of the Buy American Act.

Electronic Access Control – E629 Series Stand-Alone (Offline) Lockset

Features:
  • Designed for use with PDQ 6200 Series RIM and Surface Vertical Rod Exit Devices
  • Backlit Stainless Steel keypad buttons standard
  • Full Outdoor Standard
  • Color LED’s illuminate a visual que when the correct code is entered and low battery life
  • Simple installation and programming
  • Mechanical Key override
  • 3 Hour UL Fire Listed
  • Hardwire inputs for 12 or 24V AC or DC are standard
  • Operates on 4 AA Alkaline Batteries (Not supplied)
  • Up to 100,000 Cycles on one set of batteries
  • Standard Mortise Cylinder
Electronically Selectable Functions:
  • Relock Mode: With any valid credential the lock will unlock for a configurable number of seconds then re-lock.
  • Passage Mode: With any valid credential the lock will unlock and remain unlocked until a valid credential is entered to re-lock the device.
  • Emergency Lockout Mode: Only the master credential will unlock the door for the configured number of seconds then relock. All other codes are disabled.
Users:
  • 100 Users + 1 Master Code
Input:
  • 12-24 VAC/VDC 200mA max current
Battery Life:
  • 100,000 cycles on a set of (4) AA alkaline batteries (not included).
Programming:
  • Keypad basic (Option K) models require programming at the lock.
Weather Resistance:
  • Full outdoor standard - both sides can be exposed to weather.
For Doors:
  • 1-3/4” standard. For other door thickness, contact PDQ Customer Service
Key Override:
  • Standard (09 Storeroom)
Keys:
  • 2 Keys Per Lock.
Keyways:
  • Available in the keyways of most major manufacturers.
Interchangeable Core:
  • Best type 6 and 7 pin or Schlage LFIC
Keying:
  • Can be MK, CMK, GMK. Available Zero Bitted (K0), Keyed Different (KD), Keyed Alike (KA).
  • Can be keyed into existing masterkey systems of other manufacturers.
Finishes:
  • 613 (US10B) Oil Rubbed Bronze, 626 (US26D) Satin Chrome
Certifications, Listings, Compliances:
  • UL 10C listed for “Fire Exit Hardware” labeled for up to 3 hrs, single swing doors 4’0” x 8”0”
  • FCC part 15
  • PCB RoHS compliant
  • PDQ exit devices certified to ANSI/BHMA 156.3-2001, Grade 1
Warranty:
  • 24 months Limited Warranty
Country of Origin:
  • Proudly Designed and Assembled by PDQ in the USA.

Cross Reference – Rim Ansi Type 1

6200 Series

Cross Reference – Surface Vertical Rod Ansi Type 2 and Surface Vertical Rod LBR Ansi Type 2

6200 Series

Cross Reference – Concealed Vertical Rod Ansi Type 7 & 8 and Concealed Vertical Rod LBR Ansi Type 7 & 8

Print

Cross Reference – Mortise Ansi Type 3

6200 Series

Cross Reference – Rim Ansi Type 4

6200 Series

Cross Reference – Surface Vertical Rod Ansi Type 5 and Surface Vertical Rod LBR Ansi Type 5

6200 Series

Cross Reference – Concealed Vertical Rod Ansi Type 6 & 7 and Concealed Vertical Rod LBR Ansi Type 6 & 7

6200 Series

Cross Reference – Wide Trim

6200 Series - Cross Reference - Wide Trim

Cross Reference – Narrow Trim

6200 Series - Cross Reference - Narrow Trim

/product-data/leed.pdf

How to Order – Rim Ansi Type 1

6200 Series

How to Order – Surface Vertical Rod Ansi Type 2 and Surface Vertical Rod LBR Ansi Type 2

6200 Series

How to Order – Concealed Vertical Rod Ansi Type 7 & 8 and Concealed Vertical Rod LBR Ansi Type 7 & 8

6200 Series

How to Order – Mortise Ansi Type 3

6200 Series

How to Order – Rim Ansi Type 4

6200 Series

How to Order – Surface Vertical Rod Ansi Type 5 and Surface Vertical Rod LBR Ansi Type 5

6200 Series

How to Order – Concealed Vertical Rod Ansi Type 6 & 7 and Concealed Vertical Rod LBR Ansi Type 6 & 7

6200 Series

How to Order – Escutcheon Wide Trim

6200 Series

How to Order – Escutcheon Wide Mortise Trim

6200 Series

How to Order – Escutcheon Narrow Trim

6200 Series

How to Order – Sectional Lever Trim

6200 Series

How to Order – Plate Trim

6200 Series

How to Order – Grip Pull Wide Trim

6200 Series

How to Order – Grip Pull Narrow Trim

6200 Series

How to Order – Escutcheon Wide 199A Series Electrified Locking/Unlocking Trim

How to Order – E629 Series Stand-Alone (Offline) Lockset

/product-data/warranty.pdf