ub
product

Exit Devices

6EW 199A Electrified Trim

Motorized Locking/Unlocking (Fail Secure/Fail Safe)

FAIL SECURE (Factory Default)– Outside trim is UNLOCKED when power is ON, and LOCKED when power is OFF. Lockset will lock in the event of a power failure.

FAIL SAFE – Outside trim is LOCKED when power is ON, and UNLOCKED when power is OFF. Lockset will unlock in the event of a power failure.

 

amreican-flag
Proudly made in Lancaster, Pennsylvania, USA

Specs

Features:
  • Motorized locking/unlocking.
    FAIL SECURE (Factory Default)– Outside trim is UNLOCKED when power is ON, and LOCKED when power is OFF. Lockset will lock in the event of a power failure. FAIL SAFE – Outside trim is LOCKED when power is ON, and UNLOCKED when power is OFF. Lockset will unlock in the event of a power failure.
  • Field changeable from FAIL Secure to FAIL SAFE.
  • Built around PDQ’s world class 6 EW Series Exit Device Trim.
  • Designed for AC or DC input voltage. No need to select voltage when specifying or ordering.
  • SMARTSENSE™ control board automatically accepts AC or DC input voltage.
Performance:
  • Motor drive factory tested to over 1.4 million cycles(1.4 times the ANSI/BHMA grade 1 std).
Recommended Power Supply:
  • PDQ Model # 81440.
    – Input: 120VAC, .9A, 50/60Hz 240VAC, .6.A, 50/60Hz
    – Output: 24VDC, 2A, filtered and regulated.
  • Rated for simultaneous operation of 2ea 6 EW 199A assemblies.
  • Power Supply Requirements:
    – AC/DC Output Voltage – 1A min (filtered and regulated).
  • 12-24VDC @ < 1A initial surge (1 sec), 5mA standby after 30 sec.
    – AC Output Voltage.
  • 12-24VAC (60Hz) @ < 1A initial surge (1 sec), 15mA standby after 30 sec
Electrical Specifications:Note: Operating voltage at ± 10% of rated voltage.
  • Input voltage: 12-24VDC or 12-24VAC.
  • Max In-rush current: < 1.0A.
  • Standby current:
    – 12VAC: 12mA.
    – 24VAC: 10mA.
    – 12VDC: 3mA.
    – 24VDC: 5mA.
Certifications, Compliances, Listings:
  • ANSI/UL10C and CAN/ULC-5104 Listed for “Fire Exit Hardware” up to 3 hours for 4’0” x 8’0” maximum single, 8’0” x 8’0” maximum pairs.
  • Assembled in the U.S.A. with U.S. and foreign material. Meets requirements of the Buy American Act.
Additional options:
  • Latch Bolt Monitoring.
  • Alarms.
  • Signal Switches.

/wp-content/uploads/2016/10/leed.pdf

/product-data/warranty.pdf