Product Description
Pulls, Plates, Push Bars, Kick Plates.
Docs & Downloads:
FAQs
When should you use a push plate or pull instead of a lockset?
Push plates and pulls are the right choice for doors that don't need locking, interior doors, restrooms, storage rooms, or one-way traffic doors where only an open/close function is required. PDQ's 96 series push plates mount on the push side while pull series (1, 2, 3, 5, 9E) mount on the pull side, often specified as a matched set so both faces of the door get appropriate hardware without lock trim.
What's the difference between a push plate and a pull plate?
A push plate is a flat plate with no handle, mounted on the side of the door you push open, while a pull plate (PDQ's 86 series) combines a plate with an attached pull handle so you can grip and open the door from that side. Pull plates are typically specified for the exterior or "pull" face of a single-acting door.
Are PDQ push plates and pulls ADA compliant?
PDQ offers ADA-oriented options, including the H3 series pull with 2-1/2" hand clearance for accessible operation. Recommended mounting heights follow ADA/ANSI A117.1 guidance: pulls at 42" AFF, push plates at 45" AFF, with a minimum 4" clearance between the pull and the door stile.
What materials and finishes are push plates and pulls available in?
PDQ push plates and pulls are made in brass, bronze, and Grade 304 stainless steel, offered in finishes such as 605 bright brass, 606 satin brass, 612 satin bronze, 613E oil-rubbed bronze, 628 anodized aluminum, and 630 satin stainless steel. A 630AM antimicrobial-coated stainless option is also available for healthcare and food-service environments.
What sizes do PDQ push plates come in?
The 96 series push plates come in 3-1/2"x15", 4"x16", 6"x16", and 8"x16" sizes at 0.050" thickness, with optional cylinder (1-1/4") or thumbturn (3/8") cutouts for doors that also need a lock. Pull center-to-center spacing ranges from 5-1/2" up to 12" depending on series.
What's the difference between a kick plate and a push plate?
A kick plate mounts at the bottom of the door (up to about 12" high, part of PDQ's protection plate line) to guard against cart and foot traffic, while a push plate mounts at roughly 45" AFF to protect the door finish from hand contact and mark a clear push point. Both are available in matching stainless steel, brass, and aluminum finishes for a coordinated appearance.